product categories
- Bently Nevada
- ABB DCS/PLC
- ABB Bailey
- Emerson Ovation
- Emerson DeltaV
- Emerson Epro
- Foxboro DCS
- Yokogawa DCS
- TRICONEX/Tricon
- General Electric
- Siemens
- Woodward
- Klockner Moeller
- Indramat
- B&R
- Honeywell DCS
- ICS Triplex
- HIMA DCS
- Bachmann
- SEW
- Schneider Electric
- KUKA robot
- Motorola VME
- ProSoft
- Hitachi DCS
- GE Fanuc
- Bosch Rexroth
- Beckhoff
- Berger Lahr
- Koyo
- Kollmorgen
- Panasonic
- Pilz
- VIPA
- Xycom
- Reliance Electric
- Phoenix Contacts
- Omron
- Fuji Electric
- Danfoss
- Toshiba
- Opto 22
- Yaskawa
- Mitsubishi
- Telemecanique
- Texas Instruments
- Lenze
- Lauer
- Siemens Moore
- EPRO
- EMERSON
- OTHER
- view all
Bently Nevada 3500/22m Transient Data Interface
GE / Bently Nevada 3500/22M Series Transient Data Interfaces
Features:
Interface Between the 3500 Monitoring System and System 1 Machinery Management Ssoftware Combines Capability of 3500/20 RIM with Communication Processor Operates in Conjunction with the M Series Monitors
Description:
The GE / Bently Nevada 3500/22M Series Transient Data Interfaces (TDI) are the interface between the 3500 monitoring system and Bently Nevada's System 1 machinery management software. The TDI combines the capability of a 3500/20 Rack Interface Module with the data collection capability of a communication processor such as TDXnet.
TDI operates in the RIM slot of a 3500 rack in conjunction with the M series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady state and transient waveform data and pass this data through an Ethernet link to the host software. Static data capture is standard with the TDI, however using an optional Channel Enabling Disk will allow dynamic or transient data to be captured as well. TDI has made improvements in several areas over previous communication processors in addition to incorporating the Communication Processor function within the 3500 rack.
TDI provides certain functions common to the entire rack, however the TDI is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitor system. One TDI or RIM is required per rack. The TDI occupies only a single slot in the rack and is always located in Slo t 1 (next to the power supplies).
PLS E-mail me asap : plcsale@mooreplc.com
For Triple Modular Redundant (TMR) applications, the 3500 System requires a TMR version of the TDI. In addition to all the standard TDI functions, the TMR TDI also performs "monitor channel comparison". The 3500 TMR configuration executes monitoring voting using the setup specified in the monitor options. Using this method, the TMR TDI continually compares the outputs from three (3) redundant monitors. If the TMR detects that the information from one of those monitors is no longer equivalent (within a configured percent) to the remaining two, it will flag the monitor as being in error and place an event in the System Event List.
Product Family: 3500/22M, 3500-22M, 3500 22M
- previous :Good Price of Bently Nevada
-
Triconex 3603E 20V DC Digital Output Module
-
WOODWARD 9905-864 Steam turbine controller
-
WOODWARD 9905-860 Steam turbine controller
-
EMERSON PR6423/008-130 CON021 Eddy Current Sensor
-
EMERSON PR6426/010-000 CON021/916-160 Eddy Current Sensor
-
EMERSON KJ2201X1-BA1 12P3162X202 Logic Solver
-
EMERSON KJ1501X1-BC3 12P3935X062 DC Power Supply
-
Schneider Electric ATV61HU75N4 Variable speed drive